Cooler Installation Cyberpower / CoolerMaster Liquid Lite / MSI Coreliquid

Before You Begin:

Make sure you have all the necessary components, including the cooler, mounting brackets, thermal paste, and any additional accessories that come with your specific model.
Turn off your computer and unplug the power cable.

How to install:

Attach the bracket to the water block head. This is the initial step of the process. Simply slide the bracket onto the water block, and you're almost ready to proceed.
Mount the LGA 1700 back plate onto the motherboard. Now, proceed to install the LGA 1700 back plate. Place it on the rear side of a compatible motherboard.
Install the four standoff screws. To stabilize the LGA 1700 back plate, flip the motherboard over and install the four standoff screws on the front side. This will ensure proper installation of the water block head later on.
Apply thermal paste onto the CPU. Prior to installing the water block head, ensure that you apply thermal paste onto the CPU.
Install the water block head. Please follow the indicated order while installing the screws to ensure correct installation of the water block. Properly installing the water block ensures that the thermal paste spreads evenly on the cold plate, resulting in optimal thermal performance.
Connect the cables, use the following pictures below as a guide to connect your cables.